You can place your order secure online or by telephoning +44 (0) 1673 842704 and making your payment by either credit card or switch, or by sending us a fax to +44 (0) 01673 842944.
If you cannot find what you are looking for on this site, please get in touch by email or telephone +44 (0) 1673 842704.
All prices are inclusive of VAT at the current rate. (This only applies in EEC member countries) Please contact us for details of carriage charges for overseas customers. Please note payment must be made in full before goods will be dispatched.
Find top quality bodywork for your motorcycle and a wide range of other parts and accessories such as, seat foam, chain guards, quick release fasteners, air intakes, Scitsu temperature guages and rev counters, clip on handlebars, fuel caps, rear sets, frame sliders, top yokes, and case covers.
McAdoo Kawasaki Racing’s Conor Cummins finished third fastest overall in Monday evening’s TT practice session. ‘Conrod’ lapped at 126.167mph on the McAdoo Ninja ZX-10R Kawasaki and then went out on his McAdoo Ninja ZX-6R Supersport bike for the first time.
After practice Conor seemed satisfied:
"I'm reasonably happy with tonight's practice. The ZX-10R Kawasaki Superbike felt really strong. Although I wasn't pushing hard, I'm pleased to be third fastest, especially since I need to make a few set-up changes, including the gearing and forks. I hope to try another version of the Pirelli slicks too, so there's plenty to come.
McAdoo Kawasaki Racing’s Conor Cummins had a frustrating time at the 2009 North West 200, but still
managed to prove his potential at the very highest level of pure road racing. Red flags, terrible weather
conditions and problems in practice meant Conor was up against it on race day.
Conor managed to qualify on the third row for both the Superbike and 1000cc Superstock races on the
McAdoo Ninja ZX-10R Kawasakis, but a technical problem on Tuesday night, followed by Thursday’s
cancellation of the second 600cc session, meant the Ramsey Rocket had to start from the very back of
the grid for the Supersport race, on row 9.
Yamaha R1 2007/2008 Carbon Fibre Engine case covers
These are the covers needed to comply fully with mcrcb/acu regulations this year.
The covers are made from a very strong carbon fibre ensuring maximum protection in the event of a spill! These have been designed to fit either a full blown race bike or a road bike in standard trim.
They are very straight forward to fit and look great.
Unlike alot of the frame techs on the market these cover the entire main spar of the frame.
They are made by us to very high quality standards and because of this they have proved extremely popular with the racer / track day rider but also with the Sunday afternoon road rider wanting to "trick" his or her bike up adding the factory look at the same time.
New release for Race products this year is the Kawasaki ZX6R Rear hugger.
These are made from carefully selected Carbon Materials and manufactured to the highest standards ensuring quality and fit.
Also available now for the zx6 09 is the race fairing and single race seat unit, pics will be available soon.
McAdoo Kawasaki Racing’s Conor Cummins will get the 2009 road racing season underway this weekend at the Cookstown 100 road races. The team is based on the actual Cookstown circuit so the travel costs will be light!
New For 2009 we have added the ever popular Aprilia Tuono and the Tuono r Race Top fairing . This is a direct replacement for the road part and as with all race products/extreme style parts fully acu compliant.
The site is being updated so you can order these new products online. Please call +44 (0) 1673 842704 for immediate orders!
ZX10 08-09 HUGGER: £95.00
Carbon Fibre Rear Hugger made from the highest quality carbon fibre available today. fits straight on the the standard bike with no after market brackets required. We make everything in the UK so quality is controlled.
Suzuki GSXR1000 K3 - K4 Carbon Fibre Engine Case Covers.
These covers have been developed by ourselves here at race products to give the road or track day rider the ultimate in Carbon Accessories. The main aim of the cover was to reduce the risk of damage to the expensive cast part, and at the same time giving everyone from the Sunday afternoon biker to the full blown racer bikes the factory look. They are also acu compliant for any of you that already compete.
Honda CBR1000RR 2004/2005/2006 Carbon Fibre case Covers.
As with all the other case covers we are currently developing these have the same three main objectives. Reduce crash damage - Add a carbon accessory to your road or race bike that is only ever seen on a wsb - be applicable to every person that rides a sports bike weather your a road rider or full blown racer.
New from Race products, carbon frame techs for the 2006 and 2007 R6. Made from high quality carbon fibre and manufactured in the UK to the highest of standards, these are used by many top British and European teams alike. so now you can give your bike that factory look.
Yamaha R6 2008 and 2009 carbon fibre tank side protectors. These have been developed along side front running British Supersport Teams, They have one main objective and that is to significantly reduce the risk of petrol tank splitting in the event of a crash. And they have the added bonus of looking great adding to the bikes already awesome look. These are now being used by many of the front running Yamahas in the 2009 British Championship.
New from Race Products Carbon fibre Engine case covers. As with many of Our products these have been developed along side British champions ensuring a quality product that fits! These are designed to protect and reduce the risk of damage to the cases in the event of a crash. And plus really add to the awsome cbr600s look!
We are now making carbon case covers for the early R1 Yamaha. The cases add that factory look in minutes ! and significantly reduce the risk of case damage in the event of a crash.
Ducati 748/916/996/998 Carbon Swing Arm Cover: £80.00
Race Products have now developed a carbon swing arm cover with acu regulation chain/toe guard as part of the product. Fits in minutes looks superb and if your a racer solves the problem of having a chain guard without damaging the existing swing arm. These are designed to fit the standard swing arm.
09 Yamaha R1 RACE FAIRING:
The fairing comes in four sections and is pre fitted with dzus 1/4 turn quick fastners. The fairing is also pre drilled wherever possible . The top fairing can be cut to suit either superbike or superstock riders. Please note the race fairing can only be fitted and used with race airintakes.
09 Yamaha R1 RACE AIR INTAKES:
We now make race intake to fit the race fairing for the 09 r1. Two options are availble. Grp Glass fibre or the lighter and stronger Carbon fibre.
09 Yamaha R1 RACE SEAT:
The Yamaha race seat is as it sounds a full race version. It has a filled in base that allows riders to use race foam taloring the position and height of the seat to the individual rider. The Yamaha seat comes with a race undertray that simply bolts to the bike and stays in place. The seat is a very straight forward fit and will also fit using the standard road exhausts.